Products
Contact Information
Address: Yichang Yaojiagang Chemical Industry Park Yaogang Road 3
Telephone:0717-4068188
Fax: 0717-4068388
anti-counterfeiting query telephone:400-680-0315
Contact: Tong Guards
Mailbox:hsdxcl@126.com
LPT895N Temperature and Wear Resistant Coating
- Commodity name： LPT895N Temperature and Wear Resistant Coating
Product Use
High-performance wear-resistant ceramic particles and modified toughened heat-resistant resin composite to obtain high-performance wear-resistant corrosion-resistant polymerized ceramic coating materials. Widely used in the repair of various types of high-temperature working conditions wear parts and in various types of high-temperature working conditions have wear-resistant, corrosion-resistant requirements of the surface preparation of wear-resistant anticorrosion coating.
Performance Characteristics
●No need to heat, room temperature curing, temperature resistance up to 260 ℃;
●High bonding strength with metal substrates;
●No flow, good molding, fast curing, good operation processability.
Performance Parameters
| Physical State | Color |
Operating Time |
Usable Time |
Guaranteed Wear Resistance Operating Temperature (℃) |
Density |
| Paste | Dark gray |
30min |
24h |
-60～260 |
2.37 |
|
Bending strength |
Tensile strength |
Compressive strength(kg/cm2) |
Shear strength(kg/cm2) |
Hardness after curing(Shore D) |
|
|
528 |
327 |
1196 |
210 |
89 |
|
Method of Use
1. Surface treatment: Roughen the part to be treated, angle grinder grinding or sandblasting, etc.; clean the roughened surface; the surface of the substrate should be dry, free of oil and dust.
2. Preparation: According to the quality ratio of 2:1 will be A, B two components are mixed evenly, and used up within 30min. Generally configured while construction, the maximum amount of a configuration can not exceed 1.5 kilograms, too much gel solidified too quickly, not yet used has been partially solidified and can not be used. According to the actual temperature in winter can be more appropriate allocation, summer appropriate allocation. If the temperature is too low, the A component can be heated properly to reduce the viscosity to facilitate the configuration.
3. Coating: coating thickness is 4-8mm, the thickest can be coated 30mm, should be mixed materials layer by layer coated in the parts to be repaired, the first layer should be compacted, so that it is fully infiltrated with the substrate; coating coated to the size of the surface should be repaired and leveled off, or low viscosity wear-resistant adhesive coated surface. This material can not be machined, attention should be paid to control the thickness of the coating to avoid interference in the assembly.
4. Curing: 25 ℃ curing 24 hours can be put into use, if the temperature is low should be used to heat or extend the curing time to promote curing; general construction in winter can be used tungsten iodine lamps from the coating 40cm distance for irradiation heating.
Special Note:
The parameters of our products are obtained from laboratory tests and are for reference only. Due to the complexity and variety of the actual working conditions, it is recommended that users simulate the real environment for pre-testing.
Transportation and Storage:
Store in a cool and dry place in a sealed container with a shelf life of 1 year; keep away from hazardous sources during storage and transportation, avoid inverting and bumping; transport in accordance with the conditions of non-restricted goods.
Packing specification: two-component, 10kg/group.
Related Products
Hello, what can we do for you?
* Note: Please be sure to fill in the information accurately and we will contact you as soon as possible.
SAF Coolest v1.3.1.1 设置面板 BQOSX-AUGS-DAAEE-ZZE
无数据提示
Sorry, the current column is being updated, please look forward to it!
You can view other columns or returnHome Page