Products
Contact Information
Address: Yichang Yaojiagang Chemical Industry Park Yaogang Road 3
Telephone:0717-4068188
Fax: 0717-4068388
anti-counterfeiting query telephone:400-680-0315
Contact: Tong Guards
Mailbox:hsdxcl@126.com
LPT3009 adhesive
- Commodity name： LPT3009 adhesive
LPT3009 adhesive is mainly used for rubber and rubber, rubber and metal bonding, especially suitable for polyurethane materials and metal bonding, it and ER-65 hardener and LPT1205 metal surface treatment agent used in conjunction with the various types of wear-resistant rubber liner materials and metal bonding of the ideal adhesive, the main application of vibrating screen, valves, pumps, cyclone, drums, cold wrapping rubber and so on.
Product Features
-Super strong adhesive force; -Super strong adhesive force.
-High adhesive force with polyurethane materials
-Efficient and quick, simple operation, ready for use; -Efficient and quick, simple operation, ready for use; -Efficient and quick, simple operation, ready for use.
-Used with ER-65 hardener according to 100:6 (1kg with 60g).
Product Performance
Appearance: milky-white viscous liquid
-Peeling strength (N/mm, 24h): ≥7 (PU and carbon steel)
-Operating time: 3-4h
-Use temperature range(℃): -45-100
Use Method
(1)Metal surface treatment
Grinding: metal surface sandblasting or chemical treatment to remove surface oil, rust and other oxidized layer, surface treatment must be completed within 90 minutes after glue application.
Apply metal treatment agent:
a.LPT1205 metal treatment agent must be fully stirred and mixed well before use.
b.Apply metal treatment agent by brushing or roller coating method, usually set the dry film thickness at 5.1～10.2μm.Apply the treatment agent uniformly on the polished metal surface, dry naturally at room temperature for 60 minutes, and heat it appropriately for better effect.
(2) Rubber surface treatment:
Grinding: Use tungsten steel grinding disk to beat the non-polluted rubber surface, pay attention to prevent polishing or scorching phenomenon when grinding.
Cleaning and drying: Use cleaning agent to carefully clean the surface dirt and residue after treatment until the rinsed down cleaning agent without any dirt, and dry it naturally or dry it with added temperature.
(3) Metal and rubber bonding
Gluing: Mix LPT3009 bonding agent with ER-65 hardener at the weight ratio of 100:6, and use it up within 3 hours, mix it as you go.
Gluing: Gluing should be done in two times. Each coating should be uniform, so that the surface of the object to be adhered to be fully infiltrated by the glue, penetration, each coating of glue should be dried to non-stick hands, and then coated with the next coating of glue.
Adhesive: to be the last time the glue is dry to not sticky hands and have a sense of adhesion can be bonded, bonding will be two bonding surface once aligned, fit well with a rubber hammer from the center to the surrounding knocking solid.
Precautions
a) It is recommended to add heat in the environment where the temperature is lower than 15℃ or the humidity is more than 90%.
b)The glue should not be in contact with water, and the surface of the object to be adhered to must be dry, otherwise it will affect the curing of the glue and bonding strength.
c) Avoid contact with skin and eyes, if accidentally splashed into the eyes, should be quickly flushed with plenty of water and seek medical attention.
d) The construction place must be well ventilated.
e) Keep away from children.
Related Products
Hello, what can we do for you?
* Note: Please be sure to fill in the information accurately and we will contact you as soon as possible.
SAF Coolest v1.3.1.1 设置面板 BQOSX-AUGS-DAAEE-ZZE
无数据提示
Sorry, the current column is being updated, please look forward to it!
You can view other columns or returnHome Page