Products
Contact Information
Address: Yichang Yaojiagang Chemical Industry Park Yaogang Road 3
Telephone:0717-4068188
Fax: 0717-4068388
anti-counterfeiting query telephone:400-680-0315
Contact: Tong Guards
Mailbox:hsdxcl@126.com
LPT3000 adhesive
LPT3000 is mainly used for rubber and rubber, rubber and metal, rubber and fabric, fabric and fabric bonding. Such as conveyor belt cold vulcanization joint bonding, repair strip bonding, roller rubber and all kinds of rubber gasket material bonding. It is a two-component high-strength fast-curing adhesive.
- Commodity name： LPT3000 adhesive
Product Description
LPT3000 is mainly used for rubber and rubber, rubber and metal, rubber and fabric, fabric and fabric bonding. Such as conveyor belt cold vulcanization joint bonding, repair strip bonding, roller rubber and all kinds of rubber gasket material bonding. It is a two-component high-strength fast-curing adhesive.
Product Features
• Super adhesive force;
• efficient and fast, simple operation, repair and use;
• Safe flame retardant; at the same time suitable for uphole and downhole use;
Use in combination with ER-45 hardener according to 100:4 (1kg with 40g);
Product Performance
|
Peel strength (N/25mm)
|
30 minutes after bonding ≥ 120
|
|
24 hours after bonding ≥ 280
|
|
|
Shear strength (MPa)
|
30 minutes after bonding ≥ 2.5
|
|
24 hours after bonding ≥ 4.0
|
|
|
Use temperature range (℃)
|
35-100
|
|
flame retardant
|
From the fire self-extinguishing
|
Method of use
Grinding: Grind the surface of the adherend (rubber, metal, fabric, etc.) to make the surface roughness uniform.
Cleaning: carefully clean the surface dirt and the residue after treatment with cleaning agent, until the cleaning agent without any dirt.
Drying: natural drying or heating drying.
Mixing: The adhesive and hardener are fully mixed in a weight ratio of 100:4, and used up within 2 hours.
Glue coating: glue coating should be carried out in three times, each time the glue coating should be thin and uniform, so that the surface of the adherend is fully infiltrated and penetrated by the glue liquid. After each coating, the glue should be dried to non-sticky hands, and then coated again.
Bonding: the glue can be bonded when the glue is dry for the last time until it does not stick to hands and feels sticky. during bonding, the center line should be aligned, and the two bonding surfaces should be aligned at one time. after bonding, the glue should be knocked from the middle to the surroundings with a rubber hammer to be compacted.
Precautions
a) It must be heated when the temperature is lower than 15 ℃ or the humidity is higher than 90%.
B) The glue shall not be in contact with water, and the surface of the adherend must be dry, otherwise the curing and bonding strength of the glue will be affected.
c) Try to avoid contact with skin and eyes before curing. If splashed into eyes, rinse with plenty of water and seek medical treatment.
d) The construction site must be well ventilated.
e) Keep away from children.
Storage period:24 months
Related Products
Hello, what can we do for you?
* Note: Please be sure to fill in the information accurately and we will contact you as soon as possible.
SAF Coolest v1.3.1.1 设置面板 BQOSX-AUGS-DAAEE-ZZE
图片ALT信息： Hubei HuangshiDe New Material Technology Co., Ltd.
违禁词： First, best, first-class, leading, unique, king, leader, leader, extreme,
无数据提示
Sorry, the current column is being updated, please look forward to it!
You can view other columns or returnHome Page