Products
Contact Information
Address: Yichang Yaojiagang Chemical Industry Park Yaogang Road 3
Telephone:0717-4068188
Fax: 0717-4068388
anti-counterfeiting query telephone:400-680-0315
Contact: Tong Guards
Mailbox:hsdxcl@126.com
LPT228FN Abrasion Resistant Coating (Fast Setting)
- Commodity name： LPT228FN Abrasion Resistant Coating (Fast Setting)
Product Description:
Two-component, dark gray paste, wear-resistant composite material with hard, spherical, large-grained ceramics and quartz as the bone material. Large particles, fast curing at room temperature, for coarse particles under the impact of the working conditions of the equipment wear and rapid repair. Such as chute, cyclone, slurry pump, sorting machine, etc..
Product Performance:
Appearance and color: A. gray paste
B.yellow paste
Density(g/cm3): 2.4
Tensile strength (GB/T6329): 36MPa
Compressive strength (GB/T1041): 98MPa
Shear strength (GB/T7124): 13MPa
Bending strength (GB/T9341): 50MPa
Hardness(GB/T2411):89-91(ShoreD)
Operation time：10-15(25℃,1000g)
Initial curing time: 1h(25℃)
Full load time: 12h(25℃)
Working temperature：-60℃～120℃
Maximum working temperature: 150℃
Usage Method:
First, the substrate surface treatment (to be constructed parts of the sanding roughening treatment, and cleaned to dry);.
1, to be constructed parts of the surface with an electric wire brush (or sandblasting) to expose the fresh metal substrate grinding, rust removal standards to Sa2.5 level.
2, with special cleaning agent cleaning or dry rags will be machine surface powder, dust wipe clean, after processing the substrate surface requirements of rough, clean, dry.
Second, scraping ceramic particles wear-resistant protective coating:
Before the curing of the primer, accurately weigh the small particles of wear-resistant coating according to the quality ratio of 2:1 and mix well, and then apply the wear-resistant material on the surface of the primer to be constructed parts, and the wear-resistant coating is suitable for 4~8mm.
Third, curing:
After the wear-resistant coating is completely cured (24 hours at room temperature), it can be put into use.
Precautions
1, each time not more than 2kg of matching glue is appropriate, the matching of the glue in 15min used up, so as not to waste the curing of the glue.
2、When preparing materials, weighing should be accurate, mixing should be even, and the glue layer should be compacted when applying.
3, the temperature is lower than 15 degrees Celsius, the coating curing slow, curing incomplete, you can use tungsten iodine lamps or electric hot air and other equipment heated to 80 ℃ ~ 100 ℃ heat preservation for 2 hours after the initial curing of the coating.
Related Products
Hello, what can we do for you?
* Note: Please be sure to fill in the information accurately and we will contact you as soon as possible.
SAF Coolest v1.3.1.1 设置面板 BQOSX-AUGS-DAAEE-ZZE
无数据提示
Sorry, the current column is being updated, please look forward to it!
You can view other columns or returnHome Page