Products
Contact Information
Address: Yichang Yaojiagang Chemical Industry Park Yaogang Road 3
Telephone:0717-4068188
Fax: 0717-4068388
anti-counterfeiting query telephone:400-680-0315
Contact: Tong Guards
Mailbox:hsdxcl@126.com
LPT6117 High Strength Wear Resistant Coating
- Commodity name： LPT6117 High Strength Wear Resistant Coating
Product Description:
LPT6117 high-strength wear-resistant coating is a high-performance wear-resistant and corrosion-resistant material compounded by modified epoxy resin and wear-resistant aggregate, used in conjunction with LPT6116 high-strength wear-resistant primer. Used for the repair of metal parts subjected to severe erosion, the service life after repair generally reaches the life of the new workpiece.
Product Features:
-Good toughness,, excellent impact resistance,;; -Acid, alkali, corrosion resistance.
-Acid, alkali and high temperature resistance.
-Applicable to a variety of wear conditions of repair and protection.
-Non-flowing, easy to operate;.
Product Properties:
| Physical and mechanical properties table | |||||||||||||
| Color | Condition |
Density(g/cm3) |
Compressive Strength(Mpa) |
Shear Strength(Mpa) |
Tensile Strength(Mpa) |
Bending Strength(Mpa) |
Hardness(Shore D) |
||||||
| Gray | Paste |
2.4 |
102 |
14 |
45 |
54 |
89 |
||||||
| Curing Characteristics Table (test conditions: temperature 25℃±2℃, relative humidity 55%±5%) |
|
||||||||||||
| Operable time limit | Coating method | Curing time | Curing time required before full load operation | Operating temperature in slurry environment |
|
||||||||
|
30min |
Scrape coating |
24h |
25℃72h or above 10℃4h+100℃2h |
-60~120 |
|
||||||||
Use Method:
1、Surface treatment: clean up the surface of the part to be repaired and expose the substrate body, then rough up the substrate body, the rougher the better, and finally remove the surface floating dust or oil stains with a cleaning agent and leave it to dry;.
2、Brush the primer: Mix the two components of LPT6116 High Strength Wear Resistant Primer A and B evenly according to the ratio of 3:1 and brush them on the surface of treated metal substrate.
3、Preparation of LPT6117 high-strength wear-resistant coating: according to the ratio of 3:1 to take the appropriate amount of A, B two components mixed and stirred evenly. Prepared materials should be used up within the specified operating time limit (that is, before the material starts to become sticky), sticky hardened material can not be used again;.
4、Coating: the mixed material is coated on the primer has not yet cured and compacted, so that it is fully infiltrated with the substrate. Suitable coating thickness is 2 ~ 10mm, each layer can be coated with the thickest 20mm, the required thickness of more than 20mm should be applied layer by layer into the construction, the last layer of the surface should be repaired and leveled. This material can not be machined, should pay attention to control the thickness of the coating, so as to avoid interference in the assembly phenomenon.
5, curing: 25 ℃ curing 24 minutes after the light load can be put into use. When the temperature of construction environment is too low, heating or extending the curing time can be used to complete the curing.
Precautions:
1, the product parameters for the laboratory conditions, due to the complexity of the actual working conditions, it is recommended that users do pre-testing based on the actual working conditions.
2, the construction environment temperature decreases, the curing time will be extended, such as the need to speed up the curing speed can take appropriate measures to increase the temperature.
3, when the ambient temperature is higher than 25 ℃ or a one-time mixing amount is too large, the curing speed will be accelerated, to shorten the operation time after mixing appropriately.
Transportation and storage:
Store in a cool and dry place in airtight condition with a shelf life of 1 year. Avoid inverting and bumping during transportation, and transport as non-dangerous goods.
Packing Specification:
Two-component, 10kg/group.
For detailed safety data see LPT6117 safety data sheet.
Guarantee:The above data are obtained under standard laboratory conditions, and the company guarantees the quality of the product. However, due to the different working conditions used by the user, different surface conditions, different curing conditions, some changes in the actual performance data is normal. Storage conditions, transportation and other factors will make the stability of the glue and physical and mechanical properties have an impact.
Related Products
Hello, what can we do for you?
* Note: Please be sure to fill in the information accurately and we will contact you as soon as possible.
SAF Coolest v1.3.1.1 设置面板 BQOSX-AUGS-DAAEE-ZZE
无数据提示
Sorry, the current column is being updated, please look forward to it!
You can view other columns or returnHome Page