Products
Contact Information
Address: Yichang Yaojiagang Chemical Industry Park Yaogang Road 3
Telephone:0717-4068188
Fax: 0717-4068388
anti-counterfeiting query telephone:400-680-0315
Contact: Tong Guards
Mailbox:hsdxcl@126.com
LPT3008 adhesive
- Commodity name： LPT3008 adhesive
Product Description
LPT3008 adhesive is mainly used for rubber and rubber, rubber and metal, rubber and fabric, fabric and fabric bonding, it and ER-65 hardener, LPT1205 metal surface treatment agent and LPT366 rubber treatment agent used in conjunction with the various types of wear-resistant rubber liner materials and metal bonding of the ideal bonding agent, mainly used in vibrating screens, valves, pumps, cyclone, drums, cold wrapping rubber and so on. It is mainly used in vibrating screens, valves, pumps, cyclones, drums and other cold wrapping rubber.
Product Features
-Super strong adhesive force.
-Efficient and quick, simple operation, easy to repair and use.
-Used with ER-65 hardener according to 100:5 (1kg with 50g).
Product Performance
-Peeling strength (N/mm, 24h): ≥ 8
-Operating time: 3-4h
-Temperature range (℃): -45-100
Usage
(1)Metal surface treatment
Sanding: metal surface sandblasting or chemical treatment to remove surface oil, rust and other oxidized layer, the glue application must be completed within 90 minutes after surface treatment.
Apply metal treatment agent:
LPT1205 metal treatment agent must be fully stirred and mixed well before use.
Apply the metal treatment agent by brushing or roller coating method, usually set the dry film thickness at 5.1～10.2μm. apply the treatment agent evenly on the polished metal surface, dry naturally at room temperature for 60 minutes, and heat it up appropriately for better effect.
(2) Rubber surface treatment:
Grinding and sweeping: Use tungsten steel sanding disk to beat the non-polluted rubber surface, pay attention to prevent polishing or scorching phenomenon when sanding, and sweep the rubber surface clean.
Treatment and drying: Pour LPT366 rubber treatment agent B component into A component, stir and dissolve completely, brush on the treated rubber surface, dry naturally for more than 10 minutes for the best results.
(3) Metal and rubber bonding
Gluing: Mix the adhesive and hardener evenly at the ratio of 100:5 by weight and use it up within 3 hours.
Gluing: Gluing should be done in two times. Each application should be uniform, so that the surface of the object to be adhered to is fully moistened and penetrated by the glue, and each application of glue should be dried to non-stick hands before applying the next application of glue.
Adhesion: The last adhesive should be dried to non-stick hands and have a sense of adhesion when you can bonding, bonding will be two bonding surfaces at a time to align, fit well with a rubber hammer from the center to the four sides of the knocking solid.
Precautions
a) It is recommended to add heat when the temperature is lower than 15℃ or the humidity is more than 90%.
b) The adhesive should not be in contact with water, and the surface of the object to be adhered to must be dry, otherwise it will affect the curing of the adhesive and the bonding strength.
c) Avoid contact with skin and eyes, if accidentally splashed into the eyes, should be quickly flushed with plenty of water and seek medical attention.
d) The construction place must be well ventilated.
e) Keep away from children.
Net content: 4L.
Related Products
Hello, what can we do for you?
* Note: Please be sure to fill in the information accurately and we will contact you as soon as possible.
SAF Coolest v1.3.1.1 设置面板 BQOSX-AUGS-DAAEE-ZZE
无数据提示
Sorry, the current column is being updated, please look forward to it!
You can view other columns or returnHome Page