Products
Contact Information
Address: Yichang Yaojiagang Chemical Industry Park Yaogang Road 3
Telephone:0717-4068188
Fax: 0717-4068388
anti-counterfeiting query telephone:400-680-0315
Contact: Tong Guards
Mailbox:hsdxcl@126.com
LPT60 ordinary wear-resistant rubber sheet
- Commodity name： LPT60 ordinary wear-resistant rubber sheet
Product Description:
LPT60 wear-resistant rubber sheet is a kind of rubber product compounded with semi-cured layer and wear-resistant rubber layer.
It is mainly used for rubber covering of conveyor system roller, improving the friction coefficient between conveyor belt and active and driven roller, reducing belt slippage, and effectively prolonging the service life of conveyor belt and roller. Mainly used in cold vulcanization roller covering rubber, impact wall sticker, anti-friction liner, vibrating screen liner, pipe liner, hopper liner, reproduction point liner and other metal and wear-resistant rubber bonding parts.
Product Features:
-Pre-molded patterned rubber sheet, suitable for driving drum rubber coating; -Pre-molded patterned rubber sheet, suitable for driving drum rubber coating.
-Effectively avoid the accumulation of materials on the surface of the pulley and prevent the belt from running off.
Enhance the friction between the pulley and the belt, prevent the belt from slipping; -Protect the pulley, prevent the belt from slipping.
-Protecting the pulley, preventing wear and corrosion on the surface of the pulley.
-Patterned grooves are good for drainage and sewage; -Patterned grooves are good for drainage and sewage.
Product Technical Index:
Peel strength: 120N/25mm
Hardness: 60±5A
Abrasion: ≤120mm3
Usage
1.Material selection
According to the roller diameter size, conveyor belt hourly transportation capacity and material varieties, choose the appropriate wear-resistant rubber sheet.
2 Polishing roller and rubber plate
Clean up the residual rubber and other impurities on the drum, and then use the grinding machine to polish the surface of the drum without rusting points; the rubber plate will be adhered to the surface of the hair rough (such as half-sulfurized layer, only need to be cleaned).
3.Clean the surface
Use a brush to clean the sanding surface, and then use the cleaning agent to clean to ensure that the roller and rubber sheet surface without any residue. If there is water on the surface of the drum, it should be left to dry.
4. Apply metal treatment agent
Brush LPT-330 metal treatment agent thinly and evenly on the surface of the drum, dry naturally at room temperature for more than 60 minutes, if there are conditions, appropriate heating, can shorten the drying time.
5.Paint adhesive
LPT-3000 and ER-45 according to the 100:4 weight ratio of mixing and stirring, in the roller hard and evenly coated once; wait until it is completely dry and then coated for the second time, at the same time in the adhesive surface of the glue board is also coated once.
6.Paste the glue board
To be LPT-3000 dry to slightly sticky but not attached to the back of the finger when the adhesive plate, and compaction roller rolling, with a rubber mallet will be rubber plate whacked solid, to ensure that there is no internal air bubbles.
7. Seam treatment and finishing
Rubber plate joints for sanding and brushing rubber primer, let it dry for a few minutes, according to the proportion of the proportion of the main rubber and curing agent, quickly poured into the joints and scraping can be, and the edge of the edge of the sanding repairs.
Packaging, Storage and Transportation and Precautions:
The product should be stored at 35 ℃ below, the storage period of 24 months, after the expiration of the test can still be used.
This product is non-flammable, should be placed in a cool, dry place for storage, in the transportation process according to the general rules of non-flammable products.
Related Products
Hello, what can we do for you?
* Note: Please be sure to fill in the information accurately and we will contact you as soon as possible.
SAF Coolest v1.3.1.1 设置面板 BQOSX-AUGS-DAAEE-ZZE
无数据提示
Sorry, the current column is being updated, please look forward to it!
You can view other columns or returnHome Page