LPT898 wear-resistant composite coating

LPT898 wear-resistant composite coating (surface coating), used for mine slurry pump, turbine, flotation tank, distillation tank and other equipment cavitation, corrosion, wear and other defects of the repair and protection. It is a two-component coating consisting of A (main glue) and B (curing agent).

LPT880 Backing Filling Material

LPT880 backing filler material is mainly used for filling/supporting between crusher liner and substrate, the gap between crushed stone barrel and jacket, supporting cone and protective layer space, and as buffer material when the equipment is impacted by crushed ore or loaded with vibration; it can also be used for structural reinforcement of wear-resistant liner and cylinder gap of ball mill, and anti-impact vibration.

LPT213 rubber in metal adhesive

LPT213 rubber-to-metal adhesive is a single-coat, heat-vulcanized adhesive for bonding thermoplastic, cast-in, and reaction-injection molded polyurethane elastomers to metal or other rigid substrates. It can be achieved including different hardness polyether type or polyester type cast polyurethane and metal bonding. A higher bond strength can be produced than the polyurethane tears by itself. When bonding reaction injection molded polyurethane to metals such as aluminum or steel, priming and pre-baking are not required.

LPT220 Adhesive for rubber and metal

LPT220 adhesive is a variety of unvulcanized rubber and metal coated with LPT205.

LPT205 Adhesive for rubber and metal

LPT205 adhesive, can be used as a single coating adhesive bonding part of nitrile rubber and metal, can be used as a variety of metal, plastic and rubber bonding primer adhesive. It can be used in conjunction with adhesives such as LPT220 to increase adhesion and environmental resistance.

LPT219 Adhesive for rubber and metal

LPT219 is a single-coated, heat-vulcanized adhesive for bonding polyether or polyester cast polyurethane elastomers to metal or other rigid substrates. The change of polyurethane hardness depends on the amount of TD or MD, and it can also be used as a primer adhesive for LPT213, and LPT213 can form a double coating system to obtain better connection effect and environmental resistance.

LPT252 Rubber and Metal Adhesive

General-purpose single-coated rubber and metal heat-vulcanized adhesives.

LPT-755 efficient cleaning agent

LPT755 high efficiency cleaner is a multi-purpose industrial cleaner, used for a variety of materials surface cleaning treatment, mainly used in bonding, plating, painting, maintenance and other work before the removal of metal, rubber, fabrics, parts and other surfaces of the dust, oil, improve the cleanliness of the surface of the material.

LPT360 cleaning agent

LPT360 is a multi-purpose industrial cleaner, mainly used for bonding, plating, painting, maintenance and other work before the removal of metal, rubber, fabric, parts and other surfaces of oil and other stains, to enhance the adhesion.

LDJ-246 cylinder sealing glue

This product is the use of environmentally friendly materials, in a special process prepared by the one-component quick-drying adhesive. It is basically harmless to the human body, and the technical indicators meet the GBl8583 standard "Limit of Harmful Substances in Adhesives for Interior Decoration Materials. It has the characteristics of high bonding strength, good fluidity, easy to paint, fast drying speed, water resistance, oil resistance, heat resistance and aging resistance.

Special glue for GNJ-296 bottle cap

Gezhouba brand GNJ-296 series bottle cap special glue consists of the main glue (A component) and curing agent (B component) two components, non-toxic, non-irritating odor, with strong adhesion, good toughness, water resistance, aging resistance and other characteristics. It is suitable for the bonding of ceramic, hard plastic, glass, metal and other bottle caps with bottle body in the process of wine filling at normal temperature and in humid environment. The bonding effect of the bottle mouth with wine left on the filling line is not affected, the operation process of wiping the wine can be eliminated, and the filling efficiency can be improved.

GNJ-828 geomembrane adhesive

Geomembrane glue is divided into main membrane glue and attached membrane glue. The main membrane glue is mainly used for the bonding of geomembrane main membrane, and the attached membrane glue is mainly used for the bonding of non-woven fabrics. It has the advantages of simple process, high strength, high speed, and also has the functions of micropores and sand holes in the production process of the dense fill composite geomembrane. When bonding, it does not need to be fixed and pressurized, the initial adhesion is large, the curing speed is fast at room temperature, and the high strength can be achieved after 2 hours of bonding. It has the characteristics of acid resistance, alkali resistance, water resistance, cold resistance, aging resistance, etc.