News Center

News Center

Pay close attention to Huang Shi's science and technology and understand the latest trends of enterprises.

Aug 06,2020

Conveyor belt joint fabrication and bonding process

Features and uses of 1. products The normal temperature fast bonding of conveyor belt joints is to use normal temperature curing adhesive to bond the conveyor belt joints. Bonding without heating and pressure curing, no special equipment and tools, simple process, short operation time, low labor intensity, low cost, easy control of bonding quality, good bending resistance of bonding joints, no special requirements for the environment, the bonded joints can be put into use in a short time, suitable for the bonding of layer core conveyor belt joints in various environments.

Conveyor belt joint fabrication and bonding process

Feb 04,2020

Anti-wear solutions for pipes, chutes and equipment

Before curing should try to avoid contact with the skin, eyes, if accidentally splashed into the eyes, should quickly rinse with plenty of water and seek medical treatment.

Anti-wear solutions for pipes, chutes and equipment

Feb 04,2020

Rubber & Metal Heat Vulcanization Solutions

Mechanical treatment (sandblasting) followed by degreasing, or chemical treatment to remove processing oil, rust or other oxide layer. Use steel sand (beads) to spray ordinary steel, cast iron and other ferromagnetic metals, and the storage time after surface treatment should be controlled before oxidation and rust again; Use quartz sand to spray stainless steel, aluminum, brass, zinc and other non-ferromagnetic metals, and glue must be completed within 90 minutes after surface treatment.

Rubber & Metal Heat Vulcanization Solutions

Feb 04,2020

Metal and rubber bonding solutions

Remove the rust on the surface of the metal head (tail) wheel, wash it with a cleaning agent, apply 450 curing agent and let it stand for half an hour, or bake with an infrared lamp until it is completely dry and hard curing. Roughening the sticky surface of rubber or old leather, or peeling off the thin protective layer of the belt. Mix 90% of the 245 with 10% of the 450, and stir the mixed glue evenly to apply it.

Metal and rubber bonding solutions

Feb 04,2020

Conveyor belt cold vulcanization bonding series

This product is mainly used for conveyor belt joint bonding, room temperature, normal pressure curing, bonding area is only 1/2 of other methods, 20 minutes after bonding can be put into use, can be used in -5~80 ℃ environmental conditions.

Conveyor belt cold vulcanization bonding series
< 1 >

SAF Coolest v1.3.1.1 设置面板BQOSX-AUGS-DAAEE-ZZE

图片ALT信息： Hubei HuangshiDe New Material Technology Co., Ltd.
违禁词： First, best, first-class, leading, unique, king, leader, leader, extreme,
营业执照及SEO链接： Business License

无数据提示

Sorry, the current column is being updated, please look forward to it!

You can view other columns or returnHome Page

V1.3.1 SVG图标库请自行添加图标，用div包起来，并命名使用