Technical Support

Technical Support

Company sales and technical service network covering the whole country

Product application knowledge

Product Application Process

Sep 23,2020

Wear-resistant coating operation process

1. The surface treatment of the base material shall be roughened to the construction part, clean and dry. 2. According to the mass ratio of LPT228 large particles 3:1,LPT226 small particles 4:1. Accurately mix the and B components evenly and use them up within 30 minutes, that is, use them to cure without glue and cause waste. 3. Scraping wear-resistant coating The mixed material is coated layer by layer on the part to be constructed. After being coated to a suitable thickness, the surface shall be treated smoothly. When scraping, the coating shall be compacted to fully soak with the substrate. The thickness of wear-resistant coating should be 4-8mm, and the maximum thickness can be 30mm. 4, curing 25 ℃ curing 24 hours, can be put into use. When the temperature is low, heat should be applied or the curing time should be extended. After the coating is cured for 24 hours, it can be heated from 60 ℃ to 80 ℃ for 2 hours to obtain better comprehensive performance.

Wear-resistant coating operation process

< 1 >

Hello, what can we do for you?

* Note: Please be sure to fill in the information accurately and we will contact you as soon as possible.

Powered by www.300.cn

SAF Coolest v1.3.1.1 设置面板BQOSX-AUGS-DAAEE-ZZE

图片ALT信息： Hubei HuangshiDe New Material Technology Co., Ltd.

违禁词： First, best, first-class, leading, unique, king, leader, leader, extreme,

营业执照及SEO链接： Business License

无数据提示

Sorry, the current column is being updated, please look forward to it!

You can view other columns or returnHome Page

V1.3.1 SVG图标库请自行添加图标，用div包起来，并命名使用