Technical Support

Technical Support

Company sales and technical service network covering the whole country

Product application knowledge

Product Application Process

Sep 23,2020

Backing filling material operation process

1. Clean and prepare to remove the residual filler on the cone surface, oil stains and dirt on the parts in contact with the glue; Mount the cone and liner; Seal the cone/liner mating surface and ring hole with adhesive tape to prevent glue leakage and protect the thread on the shaft if necessary; When using, try to construct at 5-30 ℃. 2. Fix the stirrer on the low-speed hand electric drill with glue, and open LPT880 backing filling material component A, stir for 1 minute, then pour component B into component A barrel and stir with an electric stirrer. The color is uniform. Generally, the stirring time is not more than 4 minutes. 3. Pouring the mixed LPT880 glue solution and injecting it along a gap between the cone or lining plate to facilitate exhaust. If necessary, plasticine and the like can be used as cofferdam guide until it overflows from the top of the gap. Do not inject glue that is not evenly mixed (different color).

Backing filling material operation process

< 1 >

Hello, what can we do for you?

* Note: Please be sure to fill in the information accurately and we will contact you as soon as possible.

Powered by www.300.cn

SAF Coolest v1.3.1.1 设置面板BQOSX-AUGS-DAAEE-ZZE

图片ALT信息： Hubei HuangshiDe New Material Technology Co., Ltd.

违禁词： First, best, first-class, leading, unique, king, leader, leader, extreme,

营业执照及SEO链接： Business License

无数据提示

Sorry, the current column is being updated, please look forward to it!

You can view other columns or returnHome Page

V1.3.1 SVG图标库请自行添加图标，用div包起来，并命名使用