Backing filling material operation process

Release time:

2020-09-23

1. Cleaning and preparation
Remove the residual filler on the surface of the cone and the oil stain and dirt on the contact part with the glue; assemble the cone and the lining plate; seal the mating surface of the cone/the lining plate and the ring hole with adhesive tape, etc. to prevent glue leakage, and protect the thread on the shaft if necessary; when using, try to construct at 5 ℃-30 ℃
2. Glue
Fix the stirrer on the low-speed electric hand drill, open the LPT880 backing filling material A component, stir for 1 minute, then pour the B component into the component barrel while stirring with an electric stirrer, the color is uniform, and the general stirring time is not more than 4 minutes;
3. Pouring
Inject the mixed LPT880 glue solution along the cone or the gap of the lining plate to facilitate exhaust. If necessary, plasticine can be used as a cofferdam guide until it overflows from the top of the gap. Do not inject glue that is not evenly mixed (different color).
4. Curing
Place the curing 12-24 hours, temperature has a great influence on the curing time, high temperature curing fast, generally 24 hours can be put into use.
Backing Filling Material Precautions
1. The operating temperature of LPT880 backing filling material is between 5 ℃ and 30 ℃, and the cone is not easy to construct as much as possible below 5 ℃ or above 30 ℃.
2. If the temperature is too low, the operation time can be long. If the temperature is lower than 10 ℃, the component of LPT880 backing filling material can be heated to 25 ℃ and then stirred for use.
3. If the temperature is too high, the operation time will be reduced. If the temperature is higher than 25 ℃, the amount of glue will be reduced at one time, and the ingredients will be poured to avoid waste.
4. The total time from the start of mixing to the completion of filling shall not exceed 15 minutes (20 ℃ data)
 
背衬填充材料操作工艺

Previous Page

None

None

Next Page

Previous Page

None

Next Page

None

Related News

Report to User

Report to User

In order to standardize management, unify identification, ensure product quality, crack down on fake and shoddy products, and follow the principles of high quality, beauty and practicality, the company revised and upgraded the internal and external packaging of the company's products on January 1, 2022. Please understand the inconvenience caused by this!

2022-03-02

New weather in the Year of the Tiger, struggling to compose a new chapter

New weather in the Year of the Tiger, struggling to compose a new chapter

Chairman Tong Weibing has all his colleagues to pay you a New Year greeting with Huang! Starlight does not ask the paddlers, time does not live up to the people who care, thanks to have you 2021, we unite our hearts and ride the wind and waves! 2022 we make great efforts to move forward!

2022-01-31

Jia Li, secretary of the Zhijiang Municipal Party Committee, and his party's leaders visited Huang Shie for scientific and technological investigation and research.

Jia Li, secretary of the Zhijiang Municipal Party Committee, and his party's leaders visited Huang Shie for scientific and technological investigation and research.

On the afternoon of May 7, 2021, Jia Li, secretary of Zhijiang Municipal Committee, and his party's leaders visited Huang Shide for scientific and technological investigation. Chairman Tong Weibing gave a warm reception and accompanied him to visit the company. Tong Weibing introduced the company's development process, the company's current situation and future development plans to Secretary Jia.

2021-05-12

SAF Coolest v1.3.1.1 设置面板BQOSX-AUGS-DAAEE-ZZE

图片ALT信息： Hubei HuangshiDe New Material Technology Co., Ltd.
违禁词： First, best, first-class, leading, unique, king, leader, leader, extreme,
营业执照及SEO链接： Business License

无数据提示

Sorry, the current column is being updated, please look forward to it!

You can view other columns or returnHome Page

V1.3.1 SVG图标库请自行添加图标，用div包起来，并命名使用